High Temperature Grease | High Temp Bearing Grease

View all Brands

High Temperature Grease with WS2 · High Temp Grease · High Temp Bearing Grease · MK-WS2-HT EP Grease

MK-WS2-HT is a high temperature bearing grease for industrial bearings and lubrication points exposed to elevated temperature, high load, impact load, moisture or high shear. It is made with high-viscosity synthetic base oil, tungsten disulfide (WS2) particles and special additives.

Lowerfriction supplies MK-WS2-HT high temp grease in NLGI grades 0, 1 and 2 and in cartridge, jar, pail and drum packaging. The product brochure reports a dropping point above 320 °C, low oil separation, low evaporation loss and resistance to water, rust and humid environments.

Product Availability: NLGI grades 0, 1 and 2 are included in the brochure and packaging ranges from a 400 g cartridge to a 170 kilogram drum. Please verify the current grade, stock, packing, pricing and product documents before purchase.

MK-WS2-HT Product Overview

Property	Supplied Information
Product type	High temperature EP bearing grease with WS2
Product code	MK-WS2-HT
Intended use	Lubricating grease
Brochure formulation	Synthetic base oil with high viscosity, particles of tungsten disulfide and special additives.
Available NLGI grades	0, 1 and 2
Appearance / physical form	Black / semi-solid
Water solubility	Insoluble
Supplier	Lowerfriction Lubricants, Mississauga, Ontario, Canada

Specification Note: The brochure specifies a synthetic high-viscosity base oil, whereas the SDS includes both mineral oil and polyalphaolefin as constituents. Do not refer to MK-WS2-HT as totally synthetic unless this is stated in existing technical documentation.

High Temperature Grease Technical Specifications

Test / Property	Typical Data	Test Method
Cone penetration (NLGI class)	0, 1 and 2	ASTM D217 / GB/T269
Penetration / infiltration degree (0.1 mm)	310-340 / 259-265 / 220-250	ASTM D217 / GB/T269
Dropping point	>320 °C	ASTM D2265 / GB/T3498
Oil separation on steel net (100 °C, 24 h)	<0.3%	ASTM D1742-94 / SH/T0324
Copper corrosion (100 °C, 24 h)	No colour change	ASTM D4048 / GB/T7326(II)
Evaporation loss (150 °C, 22 h)	<0.4%	ASTM D972-02 / SH/T0337
Water washout (38 °C, 1 h)	<3.5%	ASTM D1264 / SH/T0109
Coefficient of friction	0.015	Brochure-listed value
Free alkali, NaOH	<0.05%	SH/T0329

Performance Note: Brochure says -20 °C (-4 °F) to 800 °C (1472 °F). Check suitability of this for continuous or intermittent service in real equipment. The 300,000 psi number is for WS2 and not a completed grease load rating until formally certified.

Industrial Applications of High Temp Bearing Grease

Application / Requirement	How MK-WS2-HT Is Used	Selection Note
Industrial bearings	For elevated temperature, load and friction.	Confirm grade and equipment requirements.
High or impact loads	EP and abrasion resistance support severe-duty contact.	Validate load and relubrication interval.
Water or humidity	Water, rust and humidity resistance supports exposed points.	Review washout and maintenance frequency.
High shear	Mechanical stability supports repeated shear conditions.	Confirm consistency and compatibility.

Choosing an NLGI Grade

The brochure gives NLGI 0 at 310-340, NLGI 1 at 259-265 and NLGI 2 at 220-250 penetration (0.1 mm). Decide the grade needed by the equipment specification, lubrication system and application technique. Do not decide just from the temperature claim.

Need help selecting a high temperature grease? Share the NLGI grade, temperature, load, moisture exposure, application method and quantity with Lowerfriction for product and purchasing guidance.

Packaging, Storage and Handling

Item	Supplied Information
Documented packaging	400 g cartridge; 1 kilogram jar; 18 kg pail; 170 kg drum. Check for availability.
Storage	Store in authorized containers in a cool, dry, well ventilated environment away from heat and sources of fire, firmly closed.
Incompatible materials	Avoid contact with acids or strong oxidizers.
Handling and PPE	Avoid skin and eye contact. Use suitable gloves and eye or face protection.
Environmental precautions	Avoid release to the environment and collect spillage.
Transport	Based on the SDS given, the product is not regulated under DOT/TDG, IMDG and ICAO/IATA transportation regulations.
Shelf life / MOQ	Not provided in the supplied documents.

Safety Note: The SDS provided here utilizes the signal word Danger and lists irritation, serious eye damage and long-term aquatic hazard. Review the latest SDS before use, provided revision dated July 5, 2020.

Product Documents

Document	Download
Product Brochure	Download MK-WS2-HT High Temperature Grease Brochure
Safety Data Sheet	Download MK-WS2-HT Safety Data Sheet

Frequently Asked Questions

What is high temperature grease used for?

Which NLGI grades are available for MK-WS2-HT?

What temperature range is listed for this high temp grease?

Is MK-WS2-HT a high temp synthetic grease?

What packaging is available for bulk high temperature grease orders?

Buy High Temperature Grease or Request a Quote

Order or Request a Quote: Select the required MK-WS2-HT product from the category page, or contact Lowerfriction to confirm current pricing, NLGI grade, packaging, bulk quantity, technical documents and purchasing support.