Product Description
MK-hBN-SP is a hexagonal boron nitride (hBN) aerosol spray for thin coating of surfaces including hard-to-reach areas. It is described in the brochure as a high-temperature anti-stick release agent and lubricant which bonds to substrates and provides lubricating, electrically insulating and thermally conductive properties.
Safety note: This is an extremely flammable aerosol with reproductive and eye-irritation hazards. Review the SDS before handling, storage, use or shipment.
Product at a Glance
*Brochure-stated hBN material/coating stability reference. Confirm suitability for the actual substrate, process and operating environment.
Key Features
- It applies a thin coating of hBN directly onto surfaces, even in hard-to-reach areas.
- Serves as a high-temperature anti-stick release agent and lubricant.
- The brochure says the coating has good adhesion to the substrates.
- Thermal conductivity and electrical insulation for heat-dissipation applications.
- The coating is called non-wetting and chemically inert in the brochure.
- The brochure says the formulation contains no fluorocarbons or lead.
Typical Applications
Proposed areas of use in the brochure are welding and brazing (weld spatter protection), sintering, plastic and rubber mold release, glass making, molten-metal processing and metal forming, and casting, extrusion, forging and stamping. It is also configured for high-temperature protective release coatings.
Safety, Handling and Shipping
| Item | Essential Product-Page Information |
|---|---|
| Signal Word | Danger |
| Primary Hazard | Extremely flammable aerosol |
| Health Hazards | Causes serious eye irritation; may cause drowsiness or dizziness; may damage fertility or the unborn child. |
| Use & Handling | Keep away from heat, sparks and open flames. Do not spray on an ignition source. Use only outdoors or in a well-ventilated area. SDS states that pregnant or breastfeeding women must not handle this product. |
| Storage | Store locked up in a well-ventilated place. Protect from sunlight. Do not expose to temperatures above 50°C / 122°F. Do not pierce or burn the container, even after use. |
| Shipping | UN1950, Aerosols, Flammable, Class 2.1. Shipping restrictions may apply; review the SDS and use an eligible shipping method. |
Frequently Asked Questions
hBN aerosol spray is used as a high-temperature anti-stick release agent and lubricant for applications such as welding and brazing, mold release, sintering, glass making, molten-metal processing, metal forming and other high-temperature release-coating applications.
The brochure lists hBN high-temperature stability references of 1000°C in air, 1400°C in vacuum and 1800°C in inert gas. These are brochure-stated material/coating reference values; suitability should be confirmed for the specific substrate, process and operating conditions.
Yes. The SDS classifies it as an extremely flammable aerosol, states that it causes serious eye irritation, may cause drowsiness or dizziness, and may damage fertility or the unborn child. Follow the SDS for handling, storage and shipping precautions.
Technical information notice: Product information is for preliminary evaluation only and does not guarantee performance or suitability. Review the current SDS, TDS, and product specifications, try a small sample first, and confirm suitability before bulk use. Read the full disclaimer
Each can contains 13 Oz/370 grams
All prices are in US Dollar.
This is Hazardous product as per UN1950 (class 2.1)
For ground shipments to Canada and USA select ground shipping option on online order form (Haz-mat fee do not apply for this service)
For all express shipping please select only Hazardous shipping options on online order form (Haz-mat fee will apply for this service)
