Product Description
MK-MoS2-SP is a molybdenum disulfide (MoS2) dry lubricant aerosol for applications where wet-film lubricants are not suitable. The spray bonds to the substrate to form a coating film and is designed for high-load lubrication across a brochure-stated temperature range of −50°C to +450°C.
Product at a Glance
Product Type: Molybdenum Disulfide (MoS2) Dry Lubricant Aerosol
Pack Options: 1 can, 12 cans, 48 cans
Transport Classification: UN1950, Aerosols, Flammable, Class 2.1
*Temperature range is brochure-stated for the spray. Confirm suitability for the actual substrate, load and operating environment.
Safety note: Extremely flammable aerosol. Keep away from ignition sources, use with adequate ventilation, protect eyes, and review the SDS before handling, storage or shipment.
Dry Moly Spray - Key Features and Typical Applications
Key Features
- Dry-film MoS2 lubricant for applications where wet-film lubricants cannot be used.
- Bonds with the substrate to form a lubricant coating film.
- Brochure-stated operating temperature range of −50°C to +450°C.
- Designed for high-load lubrication applications.
- Suitable for direct application to mechanical and moving components.
- Brochure states the formulation contains no fluorocarbons or lead.
Typical Applications
Suggested applications include bearings, chain drives, cams and cam followers, power-transmission components, machinery and precision gears, sliding or rotating components, valves and actuators, rollers, spindles, shafts and seals, automotive components, and plastic molds or extrusion dies where a dry lubricant or release coating is required.
Safety, Handling and Shipping
| Item | Essential Product-Page Information |
|---|---|
| Signal Word | Danger |
| Primary Hazard | Extremely flammable aerosol |
| Health Hazards | Causes serious eye irritation; may cause drowsiness or dizziness. |
| Use & Handling | Keep away from heat, sparks, hot surfaces and open flames. Do not spray on an ignition source. Avoid breathing gas. Use only outdoors or in a well-ventilated area. Wear suitable eye protection and other PPE as required by the SDS. |
| Storage | Store locked up in a well-ventilated place. Protect from sunlight. Do not expose to temperatures above 50°C / 122°F. Do not pierce, burn, crush or incinerate the container. |
| Shipping | UN1950, Aerosols, Flammable, Class 2.1. The SDS states the product may qualify for limited-quantity shipment; carrier and service restrictions may apply. |
Product Documents
Molybdenum Disulfide Aerosol Spray Brochure Safety Data Sheet – English Safety Data Sheet – French Safety Data Sheet – Spanish
Frequently Asked Questions
- What is molybdenum disulfide aerosol spray used for?
- MoS2 aerosol spray is used to apply a dry lubricant coating where wet-film lubricants are not suitable. The brochure lists applications including bearings, gears, chain drives, cams, power-transmission components, sliding or rotating parts, shafts, seals and mold-release applications.
- What temperature range does the MoS2 spray support?
- The brochure lists a temperature range of −50°C to +450°C. Actual suitability should be confirmed for the specific substrate, load and operating conditions.
- Is MoS2 aerosol spray hazardous?
- Yes. The SDS classifies it as an extremely flammable aerosol, states that it causes serious eye irritation, and may cause drowsiness or dizziness. Follow the SDS for handling, storage and shipping precautions.
Related Products
Technical information notice: Product information is for preliminary evaluation only and does not guarantee performance or suitability. Review the current SDS, TDS, and product specifications, try a small sample first, and confirm suitability before bulk use. Read the full disclaimer
Each can contains 13 Oz/370 gram
All prices are in US Dollar.
This is Hazardous product as per UN1950 (class 2.1)
For ground shipments to Canada and USA select ground shipping option on online order form (Haz-mat fee do not apply for this service)
For all express shipping please select only Hazardous shipping options on online order form (Haz-mat fee will apply for this service)
